Arachnid Front Axle Housing

Using years of experience and testing, In multiple forms of motorsports we have built this axle housing to use geometry to our advantage. With an aggressive 35-degrees of caster built into the housing, your tires can reach over and dig into those obstacles. while giving you more steering than you ever dreamed posible!  We then took things a step farther and built in a servo mount that lowers the servo 4mm from the factory mount helping get that cg down! With the extra strenght of the 3D printed  Carbon Composite we were able to eliminate the truss helping get the chassis even lower! these housings can take a beating and keep going! We built the entire axle around capra internals making parts availbilty extremly convenient! Link mounts are set to be used with axial ball ends.(7.5mm width) if using traxxas balls you will need to use a 1mm washer to take up the difference, failure to do so will cause premature failure of your axle.
 
Assembly notes. We found running a longer front link bolt with a nut on the back side helps with durability, with minimal clearancing you can run a high mount steering.
 
These are competition axles for the serious competitor, Designed for cars 6lbs or less, They are not designed to be used in a 10+ lbs trail truck.
 
Includes 
X1 Carbon Composite axle housing
x4 2.5x16 button head screws
X4 caster hat bushings
infinite podium finishes in your future!